Shield GSM GPRS Xbee SIM900 G-Board
Descripción
Gboard is a unique Arduino board which features a SIM900 GSM/GPRS module, an XBee socket, nRF24L01+ module interface and an ATMega328P controller. This board will add wireless XBee / nRF24L01+ control as well as GSM/GPRS connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless!
Gboard can be used as a GSM/GPRS data transfer or wireless communication project development platform. Gboard support wide range power supply and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. The board requires FTDI basic board to upload sketch, you can use our Foca board to do it.
Note:
1. There is no USB connector on the board nor is there any USB hardware, you have to use a serial connection or ICSP.
2. When you upload sketch to Gboard, please choose the board Arduino Duemilanove w/ ATmega328.
3. The bootloarder file is ATmegaBOOT_168_atmega328.hex, you can find it in the directory arduinohardwarearduinobootloadersatmega
4. The serial interface (bootloader connection) is 3.3v, not the typical 5v as on many Arduino boards – anyone using an alternative to the Foca board must take note not to risk damage.
ESPECIFICACIONES:
- Microcontrolador: ATMega328P.
- Memoria Flash: 256KB.
- Memoria RAM: 512KB.
- Incluye antena.
- Voltaje de operacion: 3.3V.
- Dimensiones: 131.00×68.80×01.60 mm.
- Peso: 71 g.
Información adicional
Peso | 0.69 kg |
---|---|
Dimensiones | 3 × 7.5 × 11 cm |